Charging The Battery - Intermec Trakker T2090 Getting Started Manual

Charging the Battery

Before using the TRAKKER T2090, you need to fully charge the
battery pack. This takes four hours or less. For information
about replacing the battery pack, see the TRAKKER T2090 Battery
Replacement Instruction Sheet (part number 067378) included with
the battery pack.
To charge the battery:
Place the unit (turned off) into the EZDock Docking System.
If you are charging the battery for the first time, let it charge
a full four hours.
While the battery is charging, the multi-function LED turns red.
Once charged, the battery continues to receive a "trickle charge"
while sitting in the dock. This is indicated by a steady green
LED. Depending on the application you are running, you can
operate the TRAKKER T2090 from 10 -20 hours on a single
charge.
209XU.005
5