Thermo Scientific Shandon ClearVue A79210100 Operator's Manual page 91

3. Identify the black
Mountant Bottle
the
O-Ring
Seal
4. Use a pair of scissors or wire-cutters to carefully
O-Ring
O-Ring Seal
cut the
Seal
surfaces of the
in the process.
O-Ring Seal
To remove the
cleaning:
1. Follow
Steps 1 to 3
2. Use a flat-bladed screwdriver to carefully prise the
O-Ring Seal
from its seat, ensuring none of the
surfaces of the
in the process.
3. Manoeuvre the
diameter portion of the
O-Ring Seal
4. Roll the
off.
Shandon ClearVue™ Operator Guide
O-Ring Seal
at the base of
spout.
, ensuring none of the
Mountant Bottle
are damaged
Mountant Bottle
on the
above.
Mountant Bottle
are damaged
O-Ring Seal
onto the larger
Mountant Bottle
up the spout until it comes
A79210100 - Iss 2
spout for
spout.
91