Technical Data - WAGO I/O SYSTEM 750 Manual
Fieldbus independent i/o modules 2 ao 0-20 ma eex i
Hide thumbs
Also See for I/O SYSTEM 750:
- Manual (468 pages) ,
- Quickstart reference (54 pages) ,
- Quick start manual (18 pages)
Table of Contents
Advertisement
10 •
750-585 [2 AO 0-20 mA EEx i]
Technical Data
2.1.1.5
Technical Data
Module Specific Data
Number of outputs
Current consumption
Voltage via power jumper contacts
Signal current
Load impedance
Linearity
Resolution
Conversion time
Measuring error
Temperature coefficient
Power consumption
Power loss
Isolation
Input current
Bit width
Dimensions (mm) W x H x L
Weight
Standards and Regulations (cf. Chapter 2.2 of the Coupler/Controller Manual)
EMC-Immunity to interference (CE)
EMC-Emission of interference (CE)
EC-EMV-Directive
EC-low voltage-directive
(internal)
max.
25°C
Pmax.
Pv
(field)
typ.
2
21 mA
DC 24.7 V Supply via 750-625 Supply Module
EEx i
0 mA ... 20 mA
< 500 Ω
± 2 LSB
12 Bit
< 2 ms
< ± 0.2 % of full scale value
< ± 0.01 % /K of full scale value
1.5 W
0.9 W
375 V (Field/System)
19 mA + load (2 x 20 mA)
2 x 16 bits data
2 x 8 bits control/status (option)
24 x 64* x 100
* from upper edge of 35 DIN rail
ca. 105 g
acc. to EN 61000-6-2 (1999)
acc. to EN 61000-6-4 (2002)
89/336/EEC
73/23/EEC
WAGO-I/O-SYSTEM 750
I/O Modules
Advertisement
Table of Contents
