Table of Contents
Advertisement
Safety Information
Understanding
Safety-Alert Messages
Following
Safety Instructions
Replacement
Instructions and Labels
4
S&C Instruction Sheet 766-526
Several types of safety-alert messages may appear throughout this instruction sheet
and on labels attached to the IntelliRupter PulseCloser Fault Interrupter. Familiarize
yourself with these types of messages and the importance of these various signal words:
"DANGER" identifies the most serious and immediate hazards that will likely
result in serious personal injury or death if instructions, including recommended
precautions, are not followed .
"WARNING" identifies hazards or unsafe practices that can result in serious
personal injury or death if instructions, including recommended precautions, are
not followed .
"CAUTION" identifies hazards or unsafe practices that can result in minor personal
injury if instructions, including recommended precautions, are not followed .
"NOTICE" identifies important procedures or requirements that can result in
product or property damage if instructions are not followed .
If you do not understand any portion of this instruction sheet and need assistance,
contact your nearest S&C Sales Office or S&C Authorized Distributor. Their telephone
numbers are listed on S&C's website sandc.com, or call the S&C Global Support and
Monitoring Center at 1-888-762-1100.
Read this instruction sheet thoroughly and carefully
before installing or operating your IntelliRupter
PulseCloser Fault Interrupter .
If additional copies of this instruction sheet are needed, contact your nearest S&C Sales
Office, S&C Authorized Distributor, S&C Headquarters, or S&C Electric Canada Ltd.
It is important that any missing, damaged, or faded labels on the equipment
be replaced immediately. Replacement labels are available by contacting your
nearest S&C Sales Office, S&C Authorized Distributor, S&C Headquarters, or
S&C Electric Canada Ltd.
DANGER
WARNING
CAUTION
NOTICE
NOTICE
Advertisement
Table of Contents
Need help?
Do you have a question about the IntelliRupter PulseCloser R3 and is the answer not in the manual?
Questions and answers