Problem Solving - EC-PACK EC-JET 1000Pro Manual

Guangzhou EC-PACK Packaging Equipment Co., Ltd.
EC-JET 1000Pro Continuous Inkjet Printer
Symptom and Possible Causes Fault Code
WHEN THE JET IS STARTED
No jet at start-up.
Jet Alignment Problems (nozzle blockage)........................................................................................ FC32
Messy print head at start-up.
Jet Alignment Problems (nozzle out of alignment)........................................................ ..................... FC32
No VOD adjustment on start-up.
Pressure Loss (mechanical)........................................................................................................... .. FC12
Blocked gutter.
Gutter Problems.............................................................................................................................. .. FC35
Jet catching print head cover slot.
Printhead Cover Catch.................................................................................................................... . FC06
Jet Alignment Problems................................................................................................................... . FC32
Ink leaking from gutter or poor gutter action.
Gutter Problems............................................................................................................................... FC35
DURING PRINTING
Poor print quality..................................................... Refer to "Identifying Faults by Print Sample"(page 75)
Jet velocity reduces - increased VOD reading.
Gutter Problems............................................................................................................................... ..FC35
Messy print, missing drops
Gutter clipping.................................................................................................................................. ..FC05
Printhead cover catch............................................................................................................... .... .....FC06
No Print
Print Delay value incorrectly set...................................................................................................... .. FC39
Part of message missing............................................................................................................... ..... FC40
AFTER THE JET IS STOPPED
Poor purge of nozzle at shutdown.
Gutter Problems.................................................................................................................... .......... FC35

Problem Solving

10.5
This sub-section describes the faults identified in the previous sub-section "Identifying Faults".
For each fault, identified by a fault code (FC) number, procedures are given for confirming the presence
of the fault, and actions necessary to rectify the fault.
Fault codes not referenced in this manual are faults that can only be rectified by a Service Engineer.
90