Select And Edit; Current Message Screen - EC-PACK EC-JET 1000Pro Manual

If the option is a direct command (e.g. Print Height from the SETUP menu), the command will be
executed.
Normally however, menu options show a value on the right of the display, separated by a colon. When
the key is press on such a menu option, the menu cursor will move right to replace the colon, and
the value will be highlighted. At this point, the new value can be typed in from the keyboard and press
key to enter the new value. Or press
The system will validate the change and reject it if it is out of range or the wrong type of date (numeric
data in an alphabetic field, and vice versa).
In some instances, a set range of options is offered for selection, e.g. Sensor "Permitted", "Out-source" or
"Triggered".
In these cases, the left and right arrow keys are used to select the desired option and then the
is pressed as described above.

Select and edit

4.2

Current Message Screen

4.2.1
After switching the printer on, the title screen will be displayed, followed shortly afterwards by the
CURRENT MESSAGE screen.
This will display the EDIT MESSAGE screen.
This will display the PRINT STATUS screen.
Guangzhou EC-PACK Packaging Equipment Co., Ltd.
EC-JET 1000Pro Continuous Inkjet Printer
key to go back to the previously selected menu.
28
key