Stop Jet; Quick Start Jet; Start Print; Stop Print - EC-PACK EC-JET 1000Pro Manual

Stop Jet

7.2
Stops the jet as normal (i.e. as per the
screen)The following message will be displayed in the status line of the display while stopping the jet:
"Stopping Jet : Please Wait"
and when the jet has stopped, the following message will be displayed:
"Jet Stopped: You May Now Switch Off"

Quick Start Jet

7.3
Start the jet without printing. (The checking system mentioned below is different from that of "Start Jet")
Please note this operation does not check any of the following:
●
Ink
●
Solvent
●
Service time
●
Phase
●
VOD
●
Modulation
i.e. it simply switches the jet on at the reference running pressure and reference modulation.
The following message will be displayed while starting the jet:
"Starting Jet : Please Wait"
WARNING: THIS COMMAND WILL START THE JET EVEN IF THE INK LEVEL IS LOW.
THE PUMP MAY BE DAMAGED IF IT IS RUN WITHOUT INK.

Start Print

7.4
Make the printer ready to print, i.e. as per
MESSAGE" screen.printing will not be started and the following message will be displayed if there is no
message stored in the printer memory:
"Print Not Starts : No Message"
Note that this has the lower level function than the main start button which sets, for example, Phase Fault
"On" when pressed. Start Print will leave Phase Fault in its current state.

Stop Print

7.5
Stops printing but does not shutdown the jet.
The following message will be displayed while stopping printing:
"Stop Print Please Wait"
Guangzhou EC-PACK Packaging Equipment Co., Ltd.
EC-JET 1000Pro Continuous Inkjet Printer
button, but without returning to the CURRENT MESSAGE
button but without returning to the "CURRENT
60