Diagnostics; Start Jet - EC-PACK EC-JET 1000Pro Manual

Diagnostics

7.
There are a large number of diagnostic functions. However, not all functions are valid at all times – some
are only valid when the jet is stopped (e.g. "Clear Nozzle"); some are valid only when the jet is running
and printing is stopped (e.g. "Start Print"), and some are only valid when both the jet and printing have
been started (e.g. "Test Print").
To keep the size of the diagnostics menu small, and to prohibit the use of functions which are invalid for
the current state of the printer, only valid functions are displayed and are selectable at any given time.
This is in addition to menu variations due to the password level.
Diagnostics menu

Start Jet

Stop Jet
Quick Start Jet
Start Print
Stop Print
Test Print
Clear Nozzle
Flush Nozzle
Flush Shut Down
Monitor Jet
System Times
System Configuration Information
Set Pressure
Filter Purge
Real-Time Switch or Edit Message
Start Jet
7.1
Attempts to start the jet but does not start printing.
The following message will be displayed while starting the jet:
"Starting Jet : Please Wait"
Guangzhou EC-PACK Packaging Equipment Co., Ltd.
EC-JET 1000Pro Continuous Inkjet Printer
Password
Jet stop Operation
● —
—
—
●
— ●
— —
— —
—
●
○ ○
● ●
● ●
● ●
● ●
○ ○
—
●
○ ○
59
Jet printing
—
—
—
—
●
●
—
○
●
●
●
—
○
—
○