Set Pressure; Filter Purge - EC-PACK EC-JET 1000Pro Manual

Head Type
Shows the print head type fitted to the printer: Micro, Midi or Macro.
SW Version
Shows the version number of the software installed in your printer.
Logic Version
Display the logical version number of the installed machine.
Raster Type
The raster is created by an algorithm which compensates for interaction between drops in flight.
Several raster types exist, each catering for different operating conditions. This option of the menu
displays a separate screen which shows which raster types your printer is using.

Set Pressure

7.12
Displays the current pressure set on the pressure DAC.
Your local distributor may ask you to use this option to:
1. Diagnose and/or check for any pressure loss.
2. Purge the filter without resetting the filter time, e.g. if changing ink only.
3. Clean out print head by use of the venture vacuum.
4. Use Quick Start Jet to try and obtain VOD measurements and ascertain if ink is thick or thin.

Filter Purge

7.13
Used by EC-JET approved Service Engineers when a new main ink filter is fitted:
On Sets a fixed pressure of 120 bits to purge the new filter and resets the Filter Change time
to 2000 hours.
Off Sets the pressure back to zero.
Guangzhou EC-PACK Packaging Equipment Co., Ltd.
EC-JET 1000Pro Continuous Inkjet Printer
64