Connection; Switch On The Printer - EC-PACK EC-JET 1000Pro Manual

Connection

3.3
Before connecting to the power supply, make sure the ON/OFF switch is in the OFF position. The wires
in this electrical supply lead are colorized in accordance with the following code:
GREEN-YELLOW EARTH (E)
BLUE NEUTRAL (N)
BROWN LIVE (L)
WARNING: THIS PRINTER MUST BE EARTHED. THIS PRINTER MUST ONLY BE
WIRED
RESPONSIBILITY FOR ANY DAMAGE CAUSED TO EITHER MACHINE OR
PERSONNEL DUE TO INCORRECT OR FAULTY WIRING.

Switch on the printer

3.3.1
Plug the printer into a suitable supply and switch the printer power switch at the rear right of the
machine to on.
The following screen is displayed when power is switched on:
There will be a delay of a few seconds while the computer logic carries out internal checks. When these
checks are complete, the following display will be seen:
Guangzhou EC-PACK Packaging Equipment Co., Ltd.
BY A QUALIFIED ELECTRICIAN.
17
EC-JET 1000Pro Continuous Inkjet Printer
EC-JET CAN ACCEPT NO