590125
7.7
Connection Box Components and Removal
Located on the side of the motor
•
To access the components in the connection
box unscrew the 4 screws indicated in figure
21 and the cover will lift off
•
To remove the complete connection box
unscrew the 2 screws indicated in figure 21
and the complete box will lift off
7.8
Power Module
Replacement
Located inside the connection box
•
Replace Power Module by removing the
connection box cover (figure 21)
•
Transferring all wiring connections to the
replacement power module
•
Remove the two screws indicated in figure
22 and lift old power module out of
connection box and refit the replacement
power module
•
Refit the connection box cover
7.9
Motor Capacitor Replacement
Located in the connection box
•
Replace the Motor Capacitor by removing the connection box cover (figure 21)
•
Removing the screw indicated in figure 22 and transfer wiring to replacement
capacitor
•
Fit the replacement capacitor
•
Refit the connection box cover
14
Figure 21
Figure 22