Service Procedures; Removing Inner Panel; Replacing The Halogen Lamps; Removing Lamp Holders - Fisher & Paykel customer care HC60DCXB 1 Service Manual

590125
7

Service Procedures

7.1

Removing Inner Panel

•
Disconnect the mains supply to Rangehood
•
Remove the aluminium filter
•
Remove the 12 screws
(figure 1)
•
Lift inner panel off (figure 2)
•
Reassemble in reverse order
7.2

Replacing the Halogen Lamps

•
Disconnect the mains supply to Rangehood
•
Allow the lamps to cool down
•
Remove the aluminium filter
•
Remove the inner panel (refer Section 7.1)
•
Turn halogen lamp to the anticlockwise (figure 3)
•
Remove halogen lamp (figure 4)
•
Reassemble in reverse order
7.3

Removing Lamp Holders

•
Disconnect the mains supply to Rangehood
•
Remove inner panel (refer section 7.1)
•
Remove halogen lamp (refer section 7.2)
•
Turn lamp holder 90° (figure 5)
•
Remove lamp holder (figure 6)
•
To disconnect wiring (refer section 7.7)
•
Reassemble in reverse order
10
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6