7.6
Motor Disassembly
•
Remove motor from housing (refer section 7.5)
•
Remove the three screws on the end cover
(figure 16)
•
Lift motor from cover (figure 17)
•
Remove the fan blade by undoing the centre
nut and slide the fan blade off the shaft (figure
18)
•
The motor can now be removed from the end
cover by turning motor clockwise and lifting off
(figure 19)
•
Removed the mounting bracket by removing
the two nuts (figure 20) and lifting off
•
Resemble
in reverse order.
13
Figure 16
Figure 17
Figure 18
Figure 19
Figure 20
590125