Configuring Tcp/Ip Related Settings; Addressing - Intellinet 520638 User Manual

Wireless broadband (switch) router standard/pro/advanced/advanced+

Table of Contents

Trigger the restoring process by clicking Restore. The WIASA will then download the configu-

ration backup file from the TFTP server.

NOTE:

Make sure the file is a valid configuration backup file for the WIASA.

3.4. Configuring TCP/IP Related Settings

The addressing settings depend on the operational mode of the WIASA. Each operational mode re-

quires different addressing settings.

3.4.1.1. Simple Access Point

If the WIASA was set to be in Simple Access Point mode, one IP address is needed. This IP address

can be manually set or automatically assigned by a DHCP server on the LAN. If you are manually

setting the IP address, Subnet mask, and Default gateway settings, set them appropriately, so that

they comply with your LAN environment. In addition, you can specify the Host name and Domain

(DNS suffix) of the WIASA.

Fig. 27. TCP/IP settings for Simple Access Point mode.

Table of Contents