A-2: Led Definitions - Intellinet 520638 User Manual

Service Name
LAN Interface
Method of obtaining an IP Address Set manually
IP Address
Subnet Mask
Default Gateway
DHCP Server
Functionality
Default Gateway
Subnet Mask
Primary DNS Server
Secondary DNS Server
First Allocateable IP Address
Allocateable IP Address Count
NAT Server
Functionality
Virtual Server Mappings
DMZ Host
Static NAT Mappings
DNS Proxy
Static DNS Mappings
Filters/Firewall
Packet Filters
URL Filters
WAN ICMP Request Blocking
State Packet Inspection (SPI)
Management
Remote Web-Based Management Disabled
UPnP
SNMP
SNMP read community
SNMP write community
Telnet

A-2: LED Definitions

There are several LED indicators on the housing of a WIASA. They are defined as follows:
Wireless Broadband Router
PPP: PPP/PPPoE. Lights up when a PPP or PPPoE link has been established.
ALV: Alive. Blinks when the WIASA is working normally.
RF: IEEE 802.11b interface
LAN: Ethernet LAN interface
WAN: Ethernet WAN interface
PWR: Power
Wireless Broadband Switch Router
PWR: Power
RF: IEEE 802.11b interface
LNK: Link. Lights up when the IEEE 802.11b interface is initialized successfully.
ACT: Active. Lights up when the IEEE 802.11b interface is transmitting or receiving data.
servicename
192.168.0.1
255.255.255.0
0.0.0.0
Enabled
192.168.0.1
255.255.255.0
192.168.0.1
0.0.0.0
192.168.0.2
20
Enabled
Disabled
Not set
Not set
Not set
Not set
Not set
Disabled
Disabled
Enabled
Enabled
public
private
Enabled
47