Table of Contents
Advertisement
3.4.1.4. Router with a Static-IP DSL/Cable Connection
Fig. 30. TCP/IP settings for Router with a Static-IP DSL/Cable Connection mode.
If the WIASA was set to be in Router with a Static-IP DSL/Cable Connection mode, two IP ad-
dresses are needed—one for the Ethernet/wireless LAN interfaces and the other for the WAN inter-
face. The IEEE 802.11b interface and the Ethernet LAN interface share the LAN IP address. The
LAN IP address must be set manually to a private IP address, say 192.168.0.xxx. The default LAN IP
address is 192.168.0.1 and the default subnet mask is 255.255.255.0. In most cases, these default set-
tings need no change.
As for the WAN IP address, it must be manually set. Consult your ISP for the correct IP address,
Default gateway, Subnet mask, Primary DNS server, and Secondary DNS server settings.
Custom MAC Address of WAN Interface enables you to change the MAC address of the Ethernet
WAN interface. Therefore, if the ISP-provided DSL or cable modem works only with the
ISP-provided Ethernet card for a computer, the WAN interface of the WIASA can mimic the
ISP-provided Ethernet card by changing its MAC address to the Ethernet card's MAC address.
30
Advertisement
Table of Contents
