Table of Contents
Advertisement
instAllAtion
pAckAge contents
• Wireless adsl2+ broadband Modem Router
• Power adapter
• ethernet Cat5 RJ-45 cable, 1.0 m (3 ft.)
• RJ- 1 1 telephone cable, 1.8 m (6 ft.)
• Quick start guide
• setup Cd with user manual and setup wizard
connections
NOTE: In addition to the items listed above in Package Contents, the minimum
requirements necessary to configure and use the Wireless adsl2+ broadband
Modem Router include a PC with a pre-installed ethernet adapter and a Web
browser (Internet explorer 4.0 or higher).
once you've confirmed you have everything needed to continue, the setup
and installation of the device is easy.
1. From the adsl port, connect the router to your adsl network using the
RJ- 1 1 telephone cable provided.
2. From any of the lan ports, connect the router to your PC, hub, switch or
other component using the ethernet Cat5 RJ-45 cable provided.
3. Connect the router's power outlet to a power source using the power adapter
provided. NOTE: Use only the power adapter included with this device.
4. Check that the green adsl led is on, indicating a successful connection.
If the adsl led is blinking — indicating that no connection has been
made — contact your Internet service provider.
isp settings
This router provides a setup wizard used to configure the adsl settings. This
wizard collects and enters adsl settings from some Internet service providers
(IsPs) simply by selecting the IsP when prompted. If you cannot find your
particular IsP listed in the wizard, refer to the Quick start instructions in the Web
Management Configuration section of the user manual on the enclosed Cd.
before starting:
• Make sure the adsl cable is connected to the router correctly. When the
adsl cable is working normally, the adsl led will be on.
• Uninstall all dial-up programs previously installed for the Usb modem or
Advertisement
Table of Contents
