Download Print this page

BOREY TECH T Series Instructions Manual page 4

Smt pick and place machine for pcb/bga making

Advertisement

BEI JING BOREY TECH CO., LTD
Website:www.en.boreytech.com
Ⅵ Mount
Warranty
Warning:Please read the manual before using the equipment forsafety operation
Statement:
•This manual and the specifications are subject to change without notice.For
more changes please visit our
company's official website or contact us.
Warning:
•Please operate the machine with right safty process,or it may be damaged,there
will be a risk of injury to the operator,this device should be moved under the
condition of power failure.
•Please operate this equipment with proper protection and installing place
•One worker one machine has been suggested;Operatorshould give tip that
"Leave dangerous position".
•In the operation of this machine,it is strictly prohibited two operations at the
same time,or there will be ijuries.
•Before the repair and maintenance,please cut off the power,otherwise operating
personnel were in zccident.
Prepare
Air compressor is necessary for negative pressure generator and feeder system on the
machine,so please prepare air compressor and set 0.5Mpa,running 0.65Mpa stop;And
output connector should be connected with outer diameter 10MM air pipe.
The storage capacity of air compressor should be more than 40L,and power supply is
AC220V,independent output is 10A in power outlet;Please don't use other machines which
need more power consumption.

Advertisement

loading