BOREY TECH T Series Instructions Manual page 16

BEI JING BOREY TECH CO., LTD
Use the rotation key of the nozzle to adjust,the speed level（1～9）,steady speed is7～9,if
feeling the machine shaking violently,please reduce the speed rate.The difference between 8
and 9 level is not large,but sharking less at 8 level.
2.10.Three-point calibration
A coordinate disc （shown as Figure 1）
Suppose the uppermost point is reference point No.1,the middle point is reference point
No.2,the lowermost point is reference point No.3,F2 to swith para-component,F3 to switch
the reference point.
Setup steps:
Website:www.en.boreytech.com