Advertisement
BEI JING BOREY TECH CO., LTD
Website:www.en.boreytech.com
Smaller vvalue that means more precise in picking and place;usually set 100 is ook.Over-low
value will make unstable components recognition.
4.6Communication
Please make it is matched with COM in device manager,or it will be failure communication.
4.7Save parameters
After all parameters have been set,please click it to save;Current parameters will be saved in PC
for next use.
Notice:
Once turning on vision correct,please keep upward camera's cover is clean and bright.
The filtering cover is Acrylic,please don't wipe with Alcojol,paints,hydrochloric acid and other
corrosive liquids.
ⅣProgram
Please swith to upward camera in vision software,then select Program,then OK to open it.
As the picture:
Press OK to enter into the file by selecting the appropriate programming file.
Advertisement
