Advertisement
BEI JING BOREY TECH CO., LTD
Notice:Please keep no object on feeder's fixing board,and making feeder's surface is
close with fixing board,and handle is important to lock feeder,please protect it.
Please don't move feeders during machine is running,it is very dangerous.
Ⅲ Use
1
Turn on power supply
Connect power and machine,close air switch at the back of the machine,release urgent stop
button（there are two URGENT stop buttons,both are released）,red power light is on,then
rotate RUN button with clockwise 90°,green RUN light will be on and the screen appears
our LOGO,at this point all setting is 0 position
2.Basic parameters set
As the picture:
2.1.Set the coordinate of the suction component
As the picture:
Website:www.en.boreytech.com
Advertisement
