Advertisement
BEI JING BOREY TECH CO., LTD
Website:www.en.boreytech.com
separately.
2.7Nozzle mounting setting
As the picture:
According to the mounting effect by using the rotation key of the nozzle to adjust the delay
level（1～9）,（steady speed level is about1～2）,after adjustment,press OK to save.The two
nozzles should be set separately.
2.8.Shelf parameters copy
Attention:
If all the materials of the shelf are the same,you can use item to copy
replication calibrated shelf to all shelves,the suction height,suction speed,suction
delay,mounting height,mounting speed and mounting delay of all shelves are consistent with
the target shelf!
2.9.X Y axis speed setting
As the picture:
Advertisement
