Advertisement
BEI JING BOREY TECH CO., LTD
This fuction is used to select which feeder stack need run vision recognition;The fuction can
be set independently in every feeder stack;For low accurate components,turn off the fuction
can improve working efficiency.Step is blow:Press feeder +- to select feeder number,then
press F4 to swith ON/OFF.
Notice:when nozzle's position is same with camera's position,please set nozzle's center point
align with camera's cross.Please set Nozzle 1 and 2 independently,then OK to save.
2.12Set vision brightness
This function is used to set upward camera's brightness;F3 is turn on,F4 is turn off.This
fuction is used with PC together.
Website:www.en.boreytech.com
Advertisement
