BEI JING BOREY TECH CO., LTD
point in end board by nozzle's rotating button,moving XY to make align camera with last
component on relative unit with first unit,then OK to save.
Above operation is to suppose small board,at same time XY range is ok and nozzle 1,nozzle 2
can reach any component position.If board is larger than XY ranger,please consider
second-level array.
3.4.Set second-level array
As shown:
Take similar board for example,if board size is larger than XY range,please consider moving
table.
Second level array mainly is moving table' movement.
Website:www.en.boreytech.com
Figure 5