Table of Contents
Advertisement
STEP 5
Push the button on the front of the base to enable
Bluetooth pairing mode and verify that the blue light on
the left hand side of the base will blink once enabled.
STEP 6
Lying the terminal flat on its left hand side, with the rear
camera facing the base, line up the lights on the screen
within the rectangular box. When the lights line up, the
terminal will begin pairing.
STEP 7
When the terminal completes this process, you will need
to hold the button on the front of your terminal for 3
seconds. The tick box displayed on screen will confirm that
Bluetooth pairing is complete.
50
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TRINITY and is the answer not in the manual?
Questions and answers
cannot get bipping noises on key pad to work
To enable the beeping sounds on the HICAPS TRINITY keypad, follow these steps:
1. Tap the accessibility icon at the present card screen.
2. Select "Training for visually impaired" mode.
3. Ask the customer if they want to use the side button or double-tap the screen to confirm selections.
4. A demo PIN entry keypad will appear.
5. As the customer drags a finger across the screen, beeping sounds will play to assist navigation.
This mode allows practice with digit selection, and digits will be spoken during training.
This answer is automatically generated
Is there any way of viewing settlements on hicaps slightly older than 30 days
Settlements older than 30 days cannot be viewed on the HICAPS Trinity terminal.
This answer is automatically generated