Door Panel Installation - Custom - Fisher & Paykel RS80A1 Installation Manual

External box The template is a single sheet with one side used for the left door
●
panel / d rawer panel and the other side for the right door panel.
The template should be placed on the back side of the door panel.
●
Door panel template
(1)
Tools
DRAWER PANEL TOP EDGE
Cross-head screwdriver
FLIP FOR RIGHT
DOOR PANEL
DRAWER PANEL DRAWER PANEL
Powered driver (optional)
HANGING BRACKET HOLES HANGING BRACKET HOLES
LEFT DOOR
PANEL TEMPLATE
1A
LH DOOR PANEL BOTTOM EDGE
30
DOOR PANEL INSTALLATION — CUSTOM
DRAWER PANEL TOP EDGE
Using the installation template
(for right French door panel)
DRAWER PANEL TOP EDGE
DRAWER PANEL
HANGING BRACKET HOLES
FLIP FOR LEFT
DOOR PANEL
2
Mark drill locations of
screw holes for the left
hanging bracket and
DRAWER PANEL
side brackets. Drill 3–32
HANGING BRACKET HOLES
(2mm) screw holes to
the marked locations.
LEFT DOOR
PANEL TEMPLATE
Align left side edge
of template with
left side edge of
top door panel.
1
RH DOOR PANEL BOTTOM EDGE
1B
Align bottom of template with
bottom edge of top door panel.
DRAWER PANEL
HANGING BRACKET HOLES
DRAWER PANEL TOP EDGE DRAWER PANEL TOP EDGE
LEFT DOOR
FLIP FOR RIGHT
PANEL TEMPLATE
DOOR PANEL
DRAWER PANEL DRAWER PANEL DRAWER PANEL DRAWER PANEL
HANGING BRACKET HOLES HANGING BRACKET HOLES HANGING BRACKET HOLES HANGING BRACKET HOLES
DRAWER PANEL
RIGHT DOOR
PANEL TEMPLATE
HANGING BRACKET HOLES LEFT DOOR LEFT DOOR
PANEL TEMPLATE PANEL TEMPLATE
RIGHT DOOR
PANEL TEMPLATE
FLIP FOR RIGHT FLIP FOR RIGHT FLIP FOR LEFT
DOOR PANEL DOOR PANEL DOOR PANEL
LH DOOR PANEL BOTTOM EDGE
LH DOOR PANEL BOTTOM EDGE LH DOOR PANEL BOTTOM EDGE RH DOOR PANEL BOTTOM EDGE
3
Move the same template to
FLIP FOR RIGHT
DOOR PANEL
right hand side of door panel.
DRAWER PANEL TOP EDGE
back side of front side of
door panel door panel
DRAWER PANEL DRAWER PANEL
HANGING BRACKET HOLES HANGING BRACKET HOLES
LEFT DOOR
PANEL TEMPLATE
RIGHT DOOR
PANEL TEMPLATE
FLIP FOR LEFT
DOOR PANEL
RIGHT DOOR
PANEL TEMPLATE
RIGHT DOOR
PANEL TEMPLATE
FLIP FOR LEFT
DOOR PANEL
RH DOOR PANEL BOTTOM EDGE
RH DOOR PANEL BOTTOM EDGE
4B
Align bottom of template with
FLIP FOR LEFT
DOOR PANEL
bottom edge of top door panel.
FLIP FOR RIGHT
DOOR PANEL
5
Mark drill locations of screw
holes for the right hanging
bracket and side brackets.
Drill 3–32 (2mm) screw holes
to the marked locations.
4A
Align right side
edge of template
with right side edge
of top door panel.