Fisher & Paykel RS80A1 Installation Manual page 33

Door panel
attachment kit
Side bracket
(10)
Side strap
(10)
#8x16 countersunk
screw
(34x)
Door handle kit
M5x25 pan head socket
screw (12x)
#8 x 16
Mush Washer
Twin Thread
Philips Screw
Tools
Hex key
FPA spanner
Cross-head screwdriver
DOOR PANEL INSTALLATION — CUSTOM
A
Remove hanging brackets
Remove the M8 washers and
M8 nuts from the M8 studs at
the top the door.
Keep the washers and nuts
z
to reuse later.
Remove the hanging bracket
from the top of each door and
set aside for later installation.
1
2
3
Attach the door and drawer
handles
Align the handle holes with the
door panel holes and secure with
M5x25 pan head socket screws (4
per each door panel).
Door handle kit available and
z
must be purchased separately.
Attach the hanging brackets
Align the bracket to the holes and
secure with #8x16 mush washer
screws (14).
Attach side brackets and straps
Align the brackets and straps to
the holes on the side of the panel
and secure with #8x16 mush
washer screws (20).
33