Custom Door Panel Installation Dimensions - Rs90 - Fisher & Paykel RS80A1 Installation Manual

Dimensions apply for the preparation and installation of custom door panels.
For Dwg and Dxf files of the below panel preparation download the folder on thekitchentools.fisherpaykel.com.
392.3mm
54.8mm
34.7mm
Ensure handle is mounted
65mm from inner edge of panel
to the center — this will avoid
interference with brackets.
All measurements to be made
from inner bottom corner.
34.7mm
For the second panel mirror
and repeat dimensions using
inner bottom corner as the
reference point.
TOP PANEL — REAR VIEW
CUSTOM DOOR PANEL INSTALLATION DIMENSIONS — RS90
Ø 2mm REF
12x Pilot holes recommended for bracket attachment.
(Do not penetrate front surface).
414mm
Recommended hole locations for installing Fisher & Paykel design handle.
65mm
TOP PANEL — REAR VIEW
Handle location for Left
hinge refrigerator
Handle location for Right
hinge refrigerator
65mm
Ø 6mm REF
4x Through holes recommended
for handle attachment.
13