Fisher & Paykel RS6121S Installation Manual page 32

Install fasteners Attaching the barbed plugs
kit
Barbed plugs (2x)
Cabinet depth
alignment gauge
(4x)
Tools
Attaching the depth alignment gauges
Cross-head
screwdriver
32
APPLIANCE PREPARATION
Before rolling into the cavity, insert a barbed plug into the
large holes at the top right and left sides of the appliance.
The plugs protect the inside surface of cabinetry from
being damaged by screws when pushing in the appliance.
Loosen the right and left screws at the top and bottom
sides of the door.
Locate the alignment gauges at correct orientation to the
right and left screws.
Right
Left
Place the alignment gauge by inserting the screw head
through the keyhole of the gauge.
Push the alignment gauge down to lock the position.
Tighten the screw just enough to firmly hold the gauge.
The alignment gauges are only temporary and must be
z
removed after installation.
Illustrations may differ from your purchased appliance.