Fisher & Paykel RS6121S Installation Manual page 36

Attaching the short glass trims
Installation kit
1
Short trim (2x)
Tools
Cutter
2
short edge
long edge
36
DOOR PANEL PREPARATION — WINE CABINET ONLY
Place the short trim along the
length of the top of door panel
cutout across the top ends of the
short trim long trims. (A)
Cut both ends of the short trim
to length.
Peel off a small portion of red
protective film from the short
edge.
3
short trim
long trim
4
short trim
long trim
Attach the peeled portion
starting from one end of flange
perpendicular to top end of
long trim.
Continue attaching the short
trim for the length of the top of
door panel cutout, peeling off
the film as you go.
Ensure the trim is aligned flush
to inside edge of flange.
Attach the remaining peeled
portion of short trim to the
flange perpendicular to top end
of the other long trim.
Repeat steps 1 – 5 to the
bottom of door panel cutout.