Appliance Preparation - Fisher & Paykel RS6121S Installation Manual

Removing the hanging brackets
Tools
M8 hex key
13mm spanner
1
13mm socket wrench
2
Illustrations may differ from your purchased appliance.

APPLIANCE PREPARATION

M8 washer
M8 nut
Remove the M8 nut and M8
washer from the M8 screw at
the top of the door using the
supplied hex key and spanner.
Remove the hanging bracket
and set aside to use later.
3
M8 screw
1/8" (3mm).
4
Loosen the M8 screws by
1/8" (3mm).
For Refrigerator-Freezer:
Repeat steps 1 - 3 to remove
the bracket of the drawer. Use
a socket wrench to loosen the
M8 nut.
31