Fisher & Paykel RS6121S Installation Manual page 62

Change the top door brackets
A
use new top
adaptor bracket
Change the bottom door bracket
c
d
use new bottom
adaptor bracket
and spacer
e
f
use existing
locking bracket
62
CHANGE THE DOOR HINGES (OPTIONAL)
1 Unscrew the M5x10 screws (4x) to
remove the top adapter bracket from
the top of the door (A).
2 Install the new top adapter bracket into
the other side of the top of the door
with M5x10 screws (4x) (B).
b
1 Remove the door panel locking
bracket and washer from the bottom
of the door by unscrewing M6x25
screw (1x) (C).
2 Remove the bottom adapter bracket
and spacer from the bottom of the
door by unscrewing M6x25 screws (2x)
and M5x30 screw (1x) (D).
3 Install the new bottom adapter bracket
and existing spacer to the other side of
the door with M6x25 screws (2x) and
M5x30 screw (1x) (E).
4 Install the existing door panel locking
bracket and washer to the other side of
the door with M6x25 screw (1x) (F).
Reinstall the door
M6x10 hex screws
Top hinge
Bottom/middle hinge
'I'
T20 screw
1 Secure the door to the top hinge and
bottom/middle hinge with M6x10
hex screws (4x).
2 Activate the hinge spring by turning the
star T20 screws to the I position.
3 Return the appliance to the
upright position, and reinstall all
covers and trims.