Removal Procedure - Gree GPC07AH-K3NNC3D Service Manual

11. Removal Procedure

NOTE:Take GPC08AH-K3NNC4A for example.
1.Remove remote controller box
Break out the remote controller box, then
push the middle of remote controller box
to make clasps remove from remote
controller box.
2.Remove filter sub-assy
Pull the filter sub-assy outward by hand
to remove the filter.
70
Warning: disconnect power supply before
removal; discharge the refrigerant completely
before unsoldering the pipes.
remote controller box
filter sub-assy
filter sub-assy2
Service Manual
remote controller box
filter sub-assy1
Maintenance