To Open The Service Cover; To Remove The Front Grille - Daikin FTXP71N2V1B Installer's Reference Manual

6 | Unit installation

6.2.2 To open the service cover

6.2.3 To remove the front grille

Installer reference guide
22
2 Remove the front panel by sliding it to the left or the right and pulling it
toward you.
Result: The front panel shaft on 1 side will be disconnected.
3 Disconnect the front panel shaft on the other side in the same manner.
a
a Front panel shaft
1 Remove 1 screw from the service cover.
2 Pull out the service cover horizontally away from the unit.
a Service cover screw
b Service cover
CAUTION
Wear adequate personal protective equipment (protective gloves, safety glasses,...)
when installing, maintaining or servicing the system.
1 Remove the front panel to remove the air filter.
2 Remove 3 screws from the front grille.
3 Push down the 3 upper hooks marked with a symbol with 3 circles.
b
a
a Upper hook
b Symbol with 3 circles
4 We recommend opening the flap before removing the front grille.
5 Place both hands under the centre of the front grille, push it up and then
toward you.
a b
a
FTXP-N
Daikin room air conditioner
4P518023-14L – 2022.06