I Memory Bank Setting - Icom IC-V8000 Instruction Manual

5
MEMORY OPERATION

I Memory bank setting

q Push [M/CALL(PRIO)] to select memory mode, then select
the desired memory channel via the tuning dial.
w Push [BANK(OPT)].
• "– –" indication blinks as follows.
e Push [BANK(OPT)] again to set the channel to bank set-
ting stand-by condition.
• "– –" indication blinking stops.
r Push [MW(S.MW)] then rotate the tuning dial to select the
desired bank to be set.
• "M" and bank initial blink as follows.
t Push [MW(S.MW)] again to set the channel into the bank.
• "M" and bank initial blinking stops.
y Push [BANK(OPT)] twice to return to regular memory con-
dition.
u Repeat steps q to y to set another memory channel into
the same or another bank.
33
z Push [MR/CALL] then select the desired
BANK/OPTION
memory channel via [Y]/[Z] or keypad.
x Push [BANK/OPTION].
• "– –" indication blinks.
MW
c Push [BANK/OPTION] again to set the
channel to bank setting stand-by condition.
• "– –" indication stops blinking.
[Y]/[Z]
v Push [FUNC] then [
[Y]/[Z] to select the desired bank to be
set.
• "M" and bank initial blink.
b Push [
CLR
the bank.
• "M" and bank initial stops blinking.
n Push [BANK/OPTION] twice to return to
regular memory channel condition.
m Repeat steps z to n to set an another
memory channel into the same or another
bank.
A(MW)] then push
CLR
A(MW)] to set the channel into