Icom IC-V8000 Instruction Manual page 72

12
OTHER FUNCTIONS
D D Channel skip setting
Sets channel skip setting from ON and OFF for memory skip
scan operation.
This item appears when set mode is accessed from memory
mode only.
Scans the memory channel.
(does not skip; default)
D D Wide/Narrow setting
Sets both the transmission and reception passband width
from wide and narrow.
When narrow is set, the transmission deviation and reception
passband width become half of the wide setting (approx.).
This setting can be set for each memory, call and VFO inde-
pendently.
This item appears in some USA versions only.
Wide setting (default)
61
Does not scan the memory
channel (skips).
Narrow setting
D D Cooling fan control
Selects the cooling fan control condition from Auto, ON-High,
ON-Mid. and ON-Low.
• Auto (AT) : The fan rotates during transmit and for 2 min.
after transmission in either high, middle or low
speed, according to the transceiver temperature.
• ON-High (OH)/Mid. (OM)/Low (OL):
The fan continuously rotates in high, middle
or low speed, respectively.
NOTE: When the transceiver internal temperature exceeds
+45˚C (approx.; +113˚F),the fan continuously rotates at mid-
dle or high speed, regardless of this setting.
Auto setting (default)
D D Weather alert function
Turns weather alert function ON and OFF.
Weather alert OFF (default)
Continuously ON with high
speed setting.
U.S.A. versions only
Weather alert ON