Panel Description - Icom IC-Q7A Instruction Manual

2

PANEL DESCRIPTION

Panel description
q
w
e
r
t
y
SPEAKER/MICROPHONE
q ANTENNA CONNECTOR (p. 1)
Connects the supplied antenna.
2
w TRANSMIT/RECEIVE INDICATOR [TX/RX] (p. 9)
Lights green while receiving a signal or when the squelch
is open; lights red while transmitting.
e PTT SWITCH [PTT]
!2
!1
Function display
(p. 4)
r FUNCTION SWITCH [FUNC]
!0
While pushing this switch, other switches and tuning dial
perform secondary functions.
o • "Push [FUNC] + a switch" means "while pushing the [FUNC]
i
t BAND SWITCH [BAND]
u
Push and hold to transmit in 144/400 MHz amateur
bands; release to receive. (p. 9)
Push briefly, then push and hold to transmit a 1750 Hz
tone. (Europe and Italy versions only; p. 24)
switch, push the switch."
Push to select the operating band (VHF, UHF, etc.). (p. 6)
• 50 MHz band,* VHF avionics band,* 144 MHz band, 300 MHz
band,* 400 MHz band, 800 MHz band* and 1200 MHz band*
can be selected.
Transfers the displayed frequency to the VFO in mem-
ory mode. (p. 6)
Push [FUNC] + [BAND] to toggle the RIT function at 800
MHz* and above. (p. 8)
Push for 2 sec. to set the tuning step for the operating
band or the selected memory channel. (p. 7)