Channel Indication Mode; Partial Reset; All Reset - Icom IC-Q7A Instruction Manual

10
OTHER FUNCTIONS

Channel indication mode

Channel indication mode is used to simplify operation. In this
mode only pre-programmed memory channel numbers are
displayed and functions are limited ([POWER], [PTT], [SQL],
[VOL], [LOCK], scanning and the tuning dial are functional).
q Select memory mode with [V/M].
w Push [V/M] for 2 sec. to enter expanded set mode.
e Rotate [DIAL] until "CH" appears.
• Turn the expanded set mode ON for selection. (p. 28)
r While pushing [FUNC], rotate [DIAL] to turn the channel
indication ON or OFF.
t Push [V/M] to exit set mode.
• To return to normal indication, turn this function OFF in
step r above.
• Frequencies must be programmed into memory channels
in advance.
Channel indication
mode set mode
32
FM
Channel indication Channel indication
mode ON mode example

Partial reset

If you want to initialize the operating conditions (VFO fre-
quency, VFO settings, set mode contents) without clearing the
memory contents, a partial resetting function is available for
the transceiver.
While pushing [FUNC] and [V/M], turn power ON to par-
tially reset the transceiver.

All reset

Reset the CPU before operating the transceiver for the first
time, or when the internal CPU malfunctions.
While pushing [FUNC], [BAND] and [V/M], turn power ON
to reset the CPU.
• "CLEAR" appears when resetting the CPU.
CAUTION:
Resetting the CPU returns all programmed
contents to their default settings.