I Initial Set Mode - Icom IC-2720H Instruction Manual

I Initial set mode

The initial set mode is accessed at power ON and al-
lows you to set seldom-changed settings. In this way,
you can "customize" transceiver operations to suit your
preference and operating style.
• Initial set mode items
• DTMF speed
MAIN
T X
• Active band
MAIN
T X
• Squelch attenuator
MAIN
T X
• Microphone sensitivity
MAIN
T X
POWER ON
AT
• Sub band mute • Key-touch beep
MAIN MAIN
T X T X
SET
: Push (front panel); or
: Push LOW (front panel); or
PRIO
*Available in the USA version only.
• Squelch delay
MAIN
T X
OTHER FUNCTIONS
D D Entering initial set mode
q While pushing [SET•
] push [PWR] for 1 sec. to enter
initial set mode.
w Push [SET•
] or [LOW•PRIO] to select the desired item.
e Rotate left band's [DIAL] to select the condition or value.
r Push [PWR] momentarily to exit initial set mode.
• Time-out timer
MAIN
T X
(microphone)
(microphone)
• Packet operation band
MAIN
T X
11
• Auto repeater*
DUP
MAIN
T X
11
• Auto power off
MAIN
T X
• Cooling fan
MAIN
T X
• Data speed
MAIN
T X
60