517794B
1.24
Control Panel
1.25
Important Screw / Bolt Torque Settings
Below are the important screw torque settings on the AquaSmart™ washer. These settings must
be adhered to. For all other screws and bolts that are not listed, we recommended that they are
tightened sufficiently without being over-tightened.
Screw / Bolt
Pump hood to cap to outer bowl
Rotor bolt to shaft
Pump housing to outer bowl
Torque (in/lbs)
27 in/lbs
70 in/lbs
18 in/lbs
10
Torque (Nm)
3Nm
8Nm
2Nm