Control Panel - Fisher & Paykel 7 Series User Manual

1
1 POWER
2 Wash Cycles
3 Remote
4 Delay Start
5 Display
6 Wash progress
indicators
7 Auto Dose
8 Optimise Wash
9 Water Level
!0 Wash Temp
!1 Spin Speed
!2 Wash Options
!3 Wash Boost
!4 START/PAUSE
!5 Keylock
6

CONTROL PANEL

2 3 4
Press to turn the washer
Turn the dial to select the desired cycle for your load.
Press and hold to control washer from the Fisher & Paykel app
when Wi-Fi is enabled.
Press to delay start time.
Shows the following:
The remaining time in the cycle that is currently running.
z
The estimated completion time of the cycle when the
z
machine is turned on.
Delayed start time of wash cycle.
z
Notifications if an error is detected or a warning is necessary.
z
Secondary option information.
z
Indicates the current status of the wash cycle.
All lights are illuminated at the start of the wash cycle.
z
The light of the current status flashes, and then turns off
z
once completed.
Press to select
MANUAL
Press to select
SANITISE
Press to increase or decrease water level.
Press to increase or decrease water temperature.
Press to increase or decrease washer spin speed.
Press to select
SOAK
Press to select
PRE WASH
Press to start or pause the selected wash cycle.
Press and hold for three seconds to disable all buttons on the
control panel.
POWER
6
5 7 8 9 !0
.
ON/OFF
or dispensing of detergent.
AUTO
and/or .
ECO
or .
RINSE +
or .
WASH +
will not be disabled when
!5
!1 !2 !3 !4
is active.
KEYLOCK