Checking The Safety Labels; Power Supply Cover Caution Label - IBM 3534-F08 Installation And User Manual

2. Ensure that all latches and hinges are in correct operating condition.
3. If the 3534 Model F08 is not installed in a rack cabinet, check for loose or
4. Check the power cord for damage.
5. Check the external signal cable for damage.
6. Check the cover for sharp edges, damage, or alterations that expose the
7. Correct any problems that you find.

Checking the safety labels

Perform the following safety label checks:
1. Verify that the power supply cover caution label shown in Figure 1 is installed on
Figure 1. Power supply cover caution label
2. Verify that the small form-factor pluggable device (SFP) label shown in Figure 2
Figure 2. SFP label (front view)
xii
IBM TotalStorage SAN Switch: 3534 Model F08 Installation and User's Guide
broken feet.
internal parts of the device.
the power supply of the 3534 Model F08.
CAUTION:
Do not remove cover, do not service, no serviceable parts. (2)
and Figure 3 on page xiii is installed on the 3534 Model F08.
SJ000337
SJ000317