Front Panel Leds; Front Panel Led Patterns During Normal Operation - IBM 3534-F08 Installation And User Manual

Figure 11. Front panel LEDs
Table 5 lists the front panel LEDs and describes the following items:
v The name of the LED
v The location of the LED
v The color of each LED
v The status of the switch that is associated with each LED color
v The action that you can take in response to that status
Table 5. Front panel LED patterns during normal operation
Name of LED Location of LED
Switch Status To the right of the
serial port
26
IBM TotalStorage SAN Switch: 3534 Model F08 Installation and User's Guide
Port Status
LED (8)
Switch
Status LED
Color of LED Status of hardware
No light Either the switch is off,
the startup process is
not complete, or the
startup has failed.
Steady green The switch is on, and
startup has successfully
completed.
Slow-flashing green One or more ports has
failed its diagnostic
check.
Ethernet
Ethernet
Status
Link Speed
LED
LED
Port Speed
LED (8)
Action
Verify that the switch has
power and that the
startup process has had
time to complete. If there
is still no light, contact
IBM.
No action is required.
Verify that the correct
device is connected to
the port.
SJ000353