Log; Language; Reset - Swienty DANA api MATIC Instruction Manual

LOG

Press [MENU], parameters are shown on the display, press [+], LOG blinks on the display, press
[ENTER] to get into the menu.
In the log you can see, how many kg, hours or number of containers the machine has filled. The
values cannot be changed.

LANGUAGE

Press [MENU], parameters are shown on the display, press [+] 2 times until LANGUAGE blinks in
the display, press [ENTER] to enter the menu.
Here you can set the language to English, German, French, Spanish or Danish by pressing [+].
All messages are shown in the chosen language. Press [ENTER] to choose a language and [Stop/
Back] to leave the menu.

RESET

In this menu you can reset the machine to factory settings for the single programs.
See these values in the table on page 30.
Reset factory settings for the chosen program:
Press [MENU], parameters are shown on the display, press [+] 3 times until RESET blinks on the
display. Press [ENTER] to choose a program and [ENTER] again to reset the chosen program. The
original values are now loaded. To leave the menu, press [STOP/BACK].
28
29
ENGLISH