Yamaha DGX-670 Reference Manual page 81

Hide thumbs Also See for DGX-670:
Table of Contents

Advertisement

2 Clock setting, etc.
[1 ]/
Clock
[2 ]
[3 ]/
Transmit Clock
[4 ]
[5 ]/
Receive
[6 ]
Transpose
[7 ]/
Start/Stop
[8 ]
3 Message Switch
[1 ]–
Sys/Ex.
[4 ]
[5 ]–
Chord Sys/Ex.
[8 ]
Determines whether the instrument is controlled by its own internal clock
or a MIDI clock signal received from an external device. Internal is the
normal Clock setting when the instrument is being used alone or as a mas-
ter keyboard to control external devices. If you are using the instrument
with an external sequencer, MIDI computer, or other MIDI device, and
you want to synchronize it to that device, set this parameter to the appro-
priate setting: USB1, USB2 or Wireless LAN. In this case, make sure that
the external device is connected properly (e.g., to the instrument's [USB
TO HOST] terminal), and that it is properly transmitting a MIDI clock
signal. When this is set for control by an external device (USB1, USB2, or
Wireless LAN), the tempo is indicated as "Ext." in the Tempo pop-up dis-
play.
If the Clock is set other than Internal, the Style, Song, Metronome and Tempo cannot be controlled
by the buttons on this instrument.
Wireless LAN is shown only when the USB Wireless LAN adaptor (UD-WL01) is connected to this
instrument.
Turns MIDI clock (F8) transmission on or off. When set to Off, no MIDI
clock or Start/Stop data is transmitted even if a Song or Style is played
back.
Determines whether or not the instrument's transpose setting is applied to
the note events received by the instrument via MIDI.
Determines whether incoming FA (start) and FC (stop) messages affect
Song or Style playback.
The Transmit setting turns MIDI transmission of MIDI System Exclusive
messages on or off. The Receive setting turns MIDI reception and recog-
nition of MIDI System Exclusive messages generated by external equip-
ment on or off.
The Transmit setting turns MIDI transmission of MIDI chord exclusive
data (Chord Detect: root and type) on or off. The Receive setting turns
MIDI reception and recognition of MIDI chord exclusive data generated
by external equipment on or off.
DGX-670 Reference Manual
9
81

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents