Yamaha DGX-670 Reference Manual page 54

[7 ]
4
Press the SONG [REC] button.
The Channel On/Off (Song) display appears. While holding down the [REC] button, press the appropriate
[1 ]–[8 ] buttons to set the desired channel to "Rec."
4
If necessary, use the Data dial to change the part assignment for the channel to be recorded.
5
Press the SONG [F/ K] (Play/Pause) button to start Punch In/Out recording.
According to the settings in step 3, play the keyboard between the Punch In and Punch Out points. Refer to
the examples of various settings illustrated on the next page.
6
Use the [8 ] (Save) buttons to carry out the Save operation.
For details, refer to "Basic Operations" in the Owner's Manual.
NOTICE
The recorded Song data will be lost if you select another Song or turn off the power to the instrument without carrying out the Save oper-
ation.
54
DGX-670 Reference Manual
Pedal Punch When this is set to On, you can use the center pedal of the pedal unit (sold
In/Out separately) to control the Punch In and Punch Out points. While a Song is
playing back, pressing (and holding) the center pedal instantly enables Punch
In recording, while releasing the pedal stops recording (Punch Out). You can
press and release the center pedal as often as you want during playback to
punch in/out of overwrite recording. Note that the current function assign-
ment of the center pedal is canceled when the Pedal Punch In/Out function
is set to On.
Pedal Punch In/Out operation may be reversed depending on the particular pedal you've connected to the
instrument. If necessary, change the pedal polarity to reverse the control
+
(page 76).