Yamaha DGX-670 Reference Manual page 64

5
Program the Sequence order, from left to right.
Press one of the REGISTRATION MEMORY [1]–[4] buttons on the panel, and then use the [4 ]
(Insert) buttons to input the number. The Cursor position can be moved by using the Cursor buttons
[][][E][F].
[3 ]
[4 ]
[5 ]
6
Press one of the [6 ]/[7 ] (Sequence End) buttons repeatedly to determine how
Registration Sequence behaves when reaching the end of the sequence.
• Stop................. Pressing the TAB [F] button or the "advance" pedal has no effect. The sequence is
7
• Top .................. The sequence starts again at the beginning.
• Next Bank...... The sequence automatically moves to the beginning of the next Registration Memory
7
Use the [1 ] (Seq.) buttons to turn the Registration Sequence function on.
8
Press the [EXIT] button to save the Registration Sequence settings as part of the
current Registration Bank file.
When a message appears asking you to change the settings, use the [7 ] (Yes) buttons to actually save
the sequence data.
NOTICE
Settings in the Registration Sequence display will be lost if you select another Registration Bank without carrying out the Save operation.
64
DGX-670 Reference Manual
7
Replace Replaces the number at the cursor position with the currently selected Registra-
tion Memory number.
Insert Inserts the number of the currently selected Registration Memory number to the
cursor position.
Delete Deletes the number at the cursor position.
"stopped."
Bank in the same folder.
Indicates the Registration Memory
numbers, in the order of the current
Registration Sequence.
5 6