Wheels; Clutch Lever Free Play Adjustment - Yamaha AG200F Owner's Manual

Wheels

To ensure maximum performance,
long service, and safe operation,
note the following:
8 Always inspect the wheels
before a ride. Check for cracks,
bends or warpage
wheel. Be sure the spokes are
tight and undamaged. If any
abnormal condition exists in a
wheel, consult a Yamaha deal-
er. Do not attempt even small
repairs to the wheel. If a wheel
is deformed or cracked, it must
be replaced.
8 Tires and wheels should be
balanced whenever either one
is changed or replaced. Failure
to have a wheel balanced can
result in poor performance,
adverse handling characteris-
tics, and shortened tire life.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU00685 8 Ride at moderate speeds after
changing a tire since the tire
surface must first be broken in
for it to develop its optimal
characteristics.
of the
1. Adjusting bolt
2. Lock nut
3. Free play
Clutch lever free play
adjustment
The clutch lever free play should
be adjusted to 10 ~ 15 mm (0.39 ~
0.59 in).
6-15
2
3
1. Loosen the locknut at the
clutch lever.
2. Turn the adjusting bolt at the
clutch lever in direction a to
increase free play or in direc-
tion b to decrease free play.
3. Tighten the locknut at the
clutch lever.
If the specified free play can-
not be obtained, proceed with
the following steps.
1
a
1
2
b
3
4
EAU00694*
5
6
7
8
9