Brake Light Switch Adjustment; Checking The Brake Shoes - Yamaha AG200F Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
w
8 Brake pedal free play should
1
be checked
chain is adjusted or the rear
2
wheel is removed and then
reinstalled.
8 Check the operation of the
3
brake light after adjusting the
rear brake.
4
8 If it is impossible to make
proper adjustment, consult a
5
Yamaha dealer.
6
7
8
9
EW000106
whenever the
1. Brake light switch
2. Adjusting nut
Brake light switch
adjustment
The rear brake light switch is acti-
vated by the brake pedal and is
properly adjusted when the brake
light comes on just before braking
takes effect. To adjust the rear
brake light switch, hold the switch
body so it does not rotate while
turning the adjusting nut.
Turn the adjusting nut in direction
a to make the brake light come on
earlier.
Turn the adjusting nut in direction
b to make the brake light come on
later.
1
a
2
b
EAU00713
6-18
1
1. Wear limit line
2. Wear indicator

Checking the brake shoes

A wear indicator is provided on
each brake. This indicator allows
inspection of shoe wear without
disassembling the brake. Apply the
brake and inspect the position of
the indicator. If the indicator reach-
es to the wear limit line, ask a
Yamaha dealer to replace the
shoes.
2
EAU00719