Handlebar Switches (For 6 V Model) - Yamaha AG200F Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
2
1
1
2
4
3
1. Dimmer switch "LIGHTS"
4
2. Light switch "LIGHTS"
3. Turn switch "TURN"
4. Horn switch "HORN"
5
Handlebar switches
(For 6 V model)
6
7
Dimmer switch "LIGHTS"
Turn the switch to "HI" for the high
8
beam and to "LO" for the low
beam.
9
Lights switch "LIGHTS"
Turn the light switch to "ON" to
turn on the headlight, taillight, and
meter lights.
3
Turn signal switch "TURN"
This is a three-position switch. The
center position is off.
Turn to "L" to turn on the left
flasher, and to "R" for the right
flasher. Be sure to turn the switch
EAU00118*
off after completing a turn.
Horn switch "HORN"
EAU00122
Press the switch to sound the horn.
EAU00131
EAU00128
1. Engine stop switch "ENGINE STOP"
Engine stop switch "ENGINE
STOP"
The engine stop switch is a safety
device for use in an emergency
EAU00130
such as when the motorcycle over-
turns or if trouble occurs in the
throttle system. Turn the switch to
"RUN" to start the engine. In case
of emergency, turn the switch to
"OFF" to stop the engine.
3-2
1
EAU00137